2
High Resolution (.00002") Improves Part Quality
The L-700 has a resolution of .00001" (0.00025 mm) or better for center
measurements and .00001"/ft (0.0008 mm/M) for angular measurements. This
extremely high resolution provides the accuracy to dramatically improve your
lathe's
quality performance and improve its scrap rate. Also by periodically
checking a lathes alignment can head off future quality problems
before
they hit
the bottom line.
Align Lathe Headstock to Its Bed up to 100 Feet
With the 100-foot (30.5 M) range of the L-700, even the largest lathes can be
quickly aligned. Since the L-700 is aligned to the axis of rotation of the spindle,
it projects that axis out to 100 feet (30.5 M), allowing the entire length of the
lathe to be aligned without changing setups. This is of particular value to large
lathes where alignment bars are not practical.
Cross-Slide Squareness
With our P-405 Remote Optical Square or our L-741 Laser System, measuring
the squareness of the cross slide is a simple task. The P-405 is placed into the
laser beam and made perpendicular to it using the T-261 Target. A penta prism
is then inserted into the P-405 fixture to bend the input beam 90º and produce an
automatically rotating laser plane that is square to axis of rotation of the spindle. A single-
axis target then measures the cross-slide squareness.
P-405 Remote Optical Square
More Information
Online
Configuration
L-700 Spindle Alignment Laser
T-261A 4-Axis Spindle Target
R-358 Computer Interface w/.05
Micron (.00002") Resolution
S-1403 Lathe9 Software for
Win XP/7/8
R-342 Laptop Computer
A-814 Shipping Case
Optional Accessories
P-405 Remote Optical Square
R-1342 Ruggedized Laptop Computer
A-807 Calibration Fixture