ORCA-Flash4.0 LT3 Digital CMOS camera C11440-42U40 Instruction manual_Ver.1.1
11
⑥
Power switch [POWER]
The power is turned ON/OFF.
When the power switch is set to "ON", the camera turns on and starts initialization and the lamp
blinks in green.
When the initialization is completed , the lamp color stays in green.
When the camera transfers data and the lamp color is orange.
When the power switch is set to "OFF", the camera returns to the power off state and the lamp
turns off.
⑦
STATUS lamp [STATUS]
The LED indicates status of camera.
Lighting color
Status of power distribution
Turn off (no color)
Power off
Green
(Blinking)
Initialization
Green (lighting)
Power on
Orange (lighting)
Data transfer
Red
(lighting)
Heat up
•
When the camera heats up, stop operation and unplug the AC
adapter immediately.
⑧
Air outlet
This is the outlet for the heat ventilation.
•
To prevent overheating inside the camera, do not wrap the camera in cloth or
other material, or block the camera’s ventilation.
•
If the camera is being operated in an enclosed environment, ensure to keep
clearance at least 10 cm from both intake and exhaust vents when setting up.
⑨
Installation holes for base plate
These are the holes to install the base plate.
•
If you use the adjuster pole and the base plate, see each installation manual.
Summary of Contents for ORCA-Flash4.0 LT3
Page 2: ...Blank page...
