background image

  

 

 

TAPP1030E01
NOV. 2000 IP
(2000) 

Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2000 Hamamatsu Photonics K.K

Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.

RELATED PRODUCTS

HAMAMATSU  PHOTONICS  K.K., Electron Tube Center 
314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205

U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218  E-mail: [email protected]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany,  Telephone: (49)8152-375-0, Fax: (49)8152-2658  E-mail: [email protected]
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00,  Fax: (33)1 69 53 71 10  E-mail: [email protected]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777  E-mail: [email protected]
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00,  Fax: (46)8-509-031-01  E-mail: [email protected]
Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733,  Fax: (39)02-935 81 741  E-mail: [email protected]

HOMEPAGE URL http://www.hamamatsu.com

HIGH-SPEED GATED IMAGE INTENSIFIER UNITS

IMAGE INTENSIFIERS

These high-speed gated image intensifier units consist of a proximity-
focused image intensifier head with a built-in gate drive circuit and a 
separate controller containing a high voltage power supply, gate control 
circuit, etc. Just connecting the image intensifier head to a CCD camera 
configures a high-speed shutter camera, ideal for high-speed emission 
analysis and high-speed motion analysis.
Custom models not available from the ICCD camera series are also 
provided, such as models with a minimum shutter time of 3 ns, an effective 
area of 40 mm in diameter, and a maximum repetition rate of 1 MHz.

Hamamatsu also sells image intensifiers as single components. These are 
available in a wide variety of types and combinations with a different 
effective area size, number of MCPs and spectral response.

Summary of Contents for C5909 SERIES













Reviews: