C11440-36U Instruction Manual Ver.1.1
23
9-8-3 TRIGGER READY OUTPUT
The trigger ready output is useful to make the frame intervals as short as possible in External
trigger mode. For example, when the camera is working in Edge trigger mode, the next frame
can start after the previous frame exposure and sensor readout are done. Thus, the camera
cannot accept a trigger for the next frame during the exposure and readout period. To reduce
useless time to be as short as possible, it is necessary to know the period when the camera can
accept a trigger for the next frame. The trigger ready output shows the trigger ready period when
the camera can accept an external trigger in External trigger mode.
•
For more detail, please refer to the timing charts of Figure 9-1 to 9-4.
ANALOG GAIN FUNCTION
9-9
The camera features an on-chip gain control capability that can multiply the analog signal in CMOS
sensor prior to converting it into a digital signal. The setting range for analog gain is 0 dB to 24 dB
and the minimum setting step is 0.1 dB.
REAL-TIME CORRECTION FUNCTIONS
9-10
There is a chance that the data from variant pixels caused by illumination and optics cannot be
negligible in the imaging with camera. The camera has the variant pixel correction feature for a
further image quality improvement. The correction can be effective in real-time without scarifying
the readout speed at all.
Summary of Contents for C11440-36U
Page 2: ...Blank page...
