Safety Precautions
Before using the Hamaco Lift, inspect all parts to confirm that there is no debris in any part of the lift and that
the lift is in good operating condition.
Where appropriate, use PPE (Personal Protective Equipment) when operating the Hamaco Lift. This should
include, but not be limited to: OSHA approved eye, face, hand, feet and head protection.
Before transportation ,lower the table to its lowest position, and attach rope to the chassis bottom section
to hoist the lift up or slide the forks of the fork lift under the chassis bottom. Transport it horizontally.
Do not turn the lift over.
•
Set up the lift on a level, stable cement surface. Never use on a slope.
•
Do not modify or alter the lift without consulting the manufacturer.
•
The power supply of this unit is for battery only.Please contact us if you want to use a switching
power supply etc.
•
Select a battery for electric vehicles.Not for car.
•
Do not touch bellows and keep them away from fire and water.
•
Keep children away from machinery.
•
If you suspect any kind of product malfunction, contact the local distributor or
HAMACO Industries Corporation immediately
DANGER
Working under the lift is extremely hazardous and dangerous.
DO NOT EVER WORK UNDER THE HAMACO LIFT WITHOUT A MAINTENANCE SAFETY DEVICE.
NEVER GO UNDER THE LIFT PLATFORM UNTIL THE LOAD IS REMOVED AND THE SCISSORS
MECHANISM IS SECURELY LOCKED IN THE OPEN POSITION.
NEVER STAND, SIT OR RIDE ON THE LIFT.
FAILURE TO FOLLOW THESE SPECIFIC INSTRUCTIONS MAY RESULT IN SERIOUS AND PERMANENT
INJURIES AND/OR DEATH.
SETTING UP AND USING THE HAMACO HYDRAULIC LIFT
Always install proper
safety device before
entering
Do not climb onto
the table
Summary of Contents for ML-150-45V-D12
Page 3: ...WARNING LABEL PLACEMENT...
