11
1. Today Weather Information including Wind Speed, Wind
Direction and the probability of Rain/Snow/Hail, Day &
Night Temperature, Day & Night Weather Status.
2. Tomorrow, One-Day-After and Two-Day-After Weather
Information including Day & Night Temperature, Day &
Night Weather Status.
3. In/Outdoor Temperature/Humidity
4. Information Window.
There are total 7 buttons on the Main unit, namely:
SET
• selected city
DATE
Weekday alarm “OFF
W-ALM”
single alarm “OFF S-ALM”
Pre-alarm
“OFF P-ALM”
• Press and HOLD [
SET
] for 3 seconds to select your (1) coun-
try, (2) time zone, (3) language, (4) exit to city display mode
DAY/NIGHT
• Critical weather information
day/night weather status
change
• Read critical weather information one by one
• increasing the value during setting
• turn ON the alarm
• Press and hold for 3 seconds to enforce a radio controlled
clock DCF signal search
• switch to next day´s weather information
• decreasing the value during setting
• Chose one of the pre-selected cities
• Turn OFF the alarm
• Press and hold or 3 seconds to enforce a wireless RF signal
search from remote sensor
MEM
• display the maximum and minimum measured temperature
and humidity readings in record
• Press and hold for 3 second to clear all the max. and min.
record
TEST
• Find the place for the device which has a good reception
• add the city into the list of your desired cities
OR
Remove the city out of the list of desired Cities
• edit your home town
CHANNEL
• switch to rear outdoor temperature and humidity readings
of channels 1, 2 and 3
• press and hold for 3 seconds to enter into the auto-circula-
tion display mode
GETTING START
• Insert 2pcs AAA batteries for remote sensor, and then
insert 2pcs AA batteries for the main unit.
• The main unit will automatically scan for the radio-control-
led clock signal and the Meteotime Weather signal
• The time and date will appear in a few minutes. Since there
is a large amount of Weather information for all regions and
days, the unit needs about 24 hours from the time of the
initial setup to complete the reception of all data.
• After the time and the date signal is being received
successfully, the display shows
SELECT COUNTRY
and then
“
FRANKFURT
” as default city in the information window. To
change the country and the city please see the information
below.
Main Unit
1
2
3
4
Remote Thermo-Hygrometer
Summary of Contents for WFC-970
Page 77: ...77 ...
