Hama Voice Neck, Operating Instructions Manual

Page: 3 / 33

2
G Operating instruction
Controls and Displays
1. Voice Assistant button
2. Microphone
3. Micro-USB charging socket
4. Multifunction button (MFB): Power / Play / Pause / Call
acceptance
5. / Next song
6. Volume - / Previous song
7. LED function indicator
Thank you for choosing a Hama product.
Take your time and read the following instructions and information
completely. Please keep these instructions in a safe place for
future reference. If you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your
attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• 1x Bluetooth ® stereo earphones
• 1x Micro-USB charging cable
• 3 pairs of silicone earpads in various sizes (S, M, L)
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating, and
only use it in a dry environment.
• Do not use the product in the immediate vicinity of heaters or
other heat sources or in direct sunlight.
• Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limits given in
the specifications.
• Do not open the device or continue to operate it if it becomes
damaged.
• Since the battery is integrated and cannot be removed, you will
need to dispose of the product as a whole. Do this in compliance
with the legal requirements.
• Dispose of packaging material immediately according to locally
applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.
• Do not attempt to service or repair the product yourself. Leave
any and all service work to qualified experts.
Warning – Battery
• Only use suitable charging devices or USB connections for
charging.
• As a rule, do not charge devices or USB connections that are
defective and do not try to repair them yourself.
• Do not overcharge the product or allow the battery to
completely discharge.
• Avoid storing, charging or using batteries in extreme
temperatures.
• When stored over a long period of time, batteries should be
charged regularly (at least every three months).
Warning – High volumes
• High sound pressure level!
• There is a risk of hearing damage.
• To prevent hearing loss, avoid listening at high volume levels
for long periods.
• Always keep the volume at a reasonable level. Loud volumes,
even over short periods, can cause hearing loss.
• Using this product limits your perception of
ambient noise. For this reason, do not operate
any vehicles or machines while
using this product.
4. Getting Started
• The earphones are equipped with a rechargeable battery. The
battery must be fully charged before using the device for the
first time.
• Ensure that the earphones are switched off before charging
them.
• Begin charging by connecting the included USB charging cable
to the charging socket (3) as well as to the USB connection
of a PC/laptop.
• Alternatively, you can charge the earphones using a suitable
USB charger. Please refer to the operating instructions for the
USB charger used.
• The LED (7) is constantly lit red during charging.
• It takes around 2 hours until the battery is completely charged.
• Once the charging process is complete, the LED (7) is lit blue.
• Disconnect all cable and mains connections after use.
Note
• The Bluetooth ® connection is not available during charging.
• If the battery level is low, a voice says, ‘Low Battery’ .
The message is repeated twice at 5-minute intervals
(approximately) before the earphones automatically switch
off. The LED indicator (7) begins to flash red. Connect the
earphones to a suitable USB port using the charging cable, in
order to recharge the battery.