4
Warning – High volumes
•
Always keep the volume at a reasonable level. Loud volumes, even over short
periods, can cause hearing loss.
•
Using this product limits your perception of
ambient noise. For this reason, do not
operate any vehicles or machines while
using this product.
4. Getting Started
•
The two earphones and the charging box are equipped with a rechargeable battery.
•
The batteries must be fully charged before using the product for the first time.
•
Ensure that the earphones are switched off before charging them.
•
Begin charging by connecting the included USB charging cable to the
charging
terminal
(3), and to the USB connection of a PC/laptop or to a suitable USB
power supply unit.
•
Place the earphones in the charging box, making sure to match them with their
correct positions (refer to the L and R labelling on the product).
•
The
status LEDs of the earphones
(7) are constantly lit red during charging.
•
After a full charge, the
status LEDs
(7) of the earphones go out.
•
The
LEDs of the charging box
(2) flash white during charging. Once charging is
complete, they are constantly lit white.
•
The charge level of the charging box, with the earphones inserted, is indicated by the
number of LEDs that are illuminated. Each LED represents approximately 25%.
•
Disconnect all cable and mains connections after use. After the cable and mains
connections have been disconnected, the L
EDs of the charging box
(2) are lit
for about 30 seconds and then go out.
Note
If you have not used the item for a few month, it may take 15-30 minutes for the
status LEDs
(2/7) to red when charging.
5. Operation
Switching the earphones on/off
•
Turn On:
Remove the earphones from the charging cradle at the same time. Both
earphones switch on automatically. A voice says, ‘Power on’ and the
status LEDs
(7) flash blue.
