Hama TT3000RBT, Operating Instructions Manual

Page: 9 / 14

6
5.3.1 Stopping playback
• Push the tone arm lift (5) up to lift the tone arm (7).
• Playback is interrupted.
5.3.2 Adjusting the speed (pitch control)
• Move the control slider (9) up to increase the speed of
the record or down to decrease it.
• Position the control slider (9) in the centre of the scale to
set it back to the original speed.
6. FM
• Enable FM (FM Radio) operating mode on the record
player by repeatedly pressing [ MODE ].
6.1 Automatic station search / saving favourites
• Press [ FM Search/Play/Pause ] (14) until the automatic
station search starts.
• The record player stops the search when it finds a
station, and automatically stores the station as a
favourite.
• Press [ FM Search/Play/Pause ] (14) again to continue
the search.
6.2 Selecting favourites
• Available stations that were found during an automatic
search are stored directly as favourites.
• You can switch between the favourites by pressing the
[ Back/Rewind ] (15) or [ Forward/Fast Forward ] (16)
button.
7. Bluetooth
You can pair your terminal device with the record player via
Bluetooth and use the record player as a playback device.
You can control playback directly on the terminal device.
Note – Bluetooth
• Check whether your mobile device (smartphone, tablet,
etc.) is Bluetooth-capable.
• Note that the maximum range for Bluetooth is 10
metres without obstacles such as walls, people, etc.
• The Bluetooth connection may be disrupted by other
Bluetooth devices/connections in the vicinity.
• It is only possible to connect the record player to one
terminal device.
• Note that compatibility depends on the supported
Bluetooth profiles as well as the Bluetooth versions
being used. (See technical specifications, operating
instructions of the terminal device in use)
• Enable Bluetooth operating mode on the record player by
repeatedly pressing [ MODE ].
7.1 Bluetooth pairing
• Make sure that your Bluetooth-capable terminal device is
on and Bluetooth is activated.
• Open the Bluetooth settings on your terminal device
and wait until HAMA TT3000RBT appears in the list of
Bluetooth devices found.
• If necessary, start searching for Bluetooth devices on your
terminal device.
• Select HAMA TT3000RBT and wait until the record
player is listed as connected in the Bluetooth settings on
your terminal device.
• ‘ BT ’ is constantly lit in the display (10) after the
connection has been successfully established.
• Start and control audio playback using the controls of the
terminal device.
Note – Bluetooth Password
• Some terminal devices require a password in order to
connect to another Bluetooth device.
• If your terminal device requests a password for
connection to the record player, enter 0000 .