4
•
Use the fastening tab to pull the drive belt on the
underside of the turntable over the drive roller of the
motor.
Motor Pully
Ribbon
Belt
•
Remove the attachment tab.
4.2 Turntable mat
•
Place the included turntable mat in the centre of the
turntable.
4.3 Removing the protective cap from the stylus
Note
•
The protective cap protects the stylus from dust and
other soiling.
•
Before starting playback or recording, remove the
protective cap from the stylus.
•
When finished using the record player, replace the
protective cap on the stylus.
•
Do not touch the stylus with your hands. Doing so may
cause damage.
•
Pull the protective cap off of the stylus (A) of the tone
arm (B) by pulling it forward.
4.4 Tone arm clip for safe transportation
Note
•
The tone arm is secured for transport with a clip.
•
Remove the clip before use.
•
Secure the tone arm before moving the device to
protect it from damage.
Removing the transport safety
•
Remove the clip from the tone arm. It is located directly
at the tone arm rest (6).
•
Now the tone arm (7) can be removed from the tone
arm rest.
Attaching the transport safety
•
Place the tone arm (7) on the tone arm rest (6).
•
Attach the clip to the tone arm.
4.5 Adjusting the tone arm (zero balancing)
The tone arm must always be balanced. It should move
horizontally over the turntable only. Adjust the tone arm to
correct any tipping forwards or backwards.
•
Remove the protective cap as described in section
Removing the protective cap from the stylus
.
•
Remove the tone arm (7) from the tone arm rest (6).
•
Turn the counterweight (4) clockwise or anticlockwise to
move it until the tone arm (7) is level over the turntable.
•
Set the tone arm (7) back on the tone arm rest (6).
Balancing ring
Summary of Contents for TT3000RBT
Page 13: ...10...
