5
8.2.2 Procedure for Android users
•
Open the UNDOK app on your tablet or smartphone.
•
Tap the Set up audio system menu item.
•
Make sure that the subwoofer is in SETUP mode Set the
product to the factory settings, if necessary. Confirm the
query with Next.
•
On the following page, you will find a list of all
available WiFi networks as well as the suggested
audio systems; the Hama product (for example, Setup
Hama DIR3120LED) should be listed here. Tap the
corresponding WiFi network.
•
Now choose a name for the subwoofer (for example,
Office DIR3120) and confirm your entry with Next.
•
The various network configuration options are then
offered to you (where applicable, WiFi, WPS and
Ethernet). Tap the desired method; the UNDOK app
switches to the next window.
•
Depending on the selected method, you can now select
and configure the desired WiFi network, set up a WPS
connection or set up the connection using a LAN cable.
•
Finally, the subwoofer connects to the network; by
tapping Start using my audio system, you will be able to
use the device in the UNDOK app.
•
The network connection LED indicator (1) is now
constantly lit.
9.Connection via Auxiliary Input
You can use the analogue audio input (AUX) to connect
mobile devices (for example, smartphone, tablet PC, MP3
player, etc.) as well as older analogue sources (CD/DVD
player etc.) to the subwoofer and play their audio signals
using the subwoofer.
Note
•
Switch off the subwoofer before connecting a
terminal device.
•
Do not bend or crush the cable.
•
Connect your terminal device to the AUX socket (9) on
the subwoofer using a 3.5-mm audio cable (jack cable).
•
Activate the Auxiliary Input mode by repeatedly pressing
[MODE] (5).
•
The Mode status LED (2) is lit green.
10. High Level input (HF IN)
The High Level input allows you to connect your existing
sound system to the subwoofer, in order to expand a 2.0
sound system into a 2.1 sound system, for example.
Note
•
Switch off the subwoofer before connecting a terminal
device.
•
Do not bend or crush the cable.
•
Connect your terminal device to the HF IN socket (11) on
the subwoofer using a 3.5-mm RCA cable.
•
Activate the HF IN mode by repeatedly pressing [MODE]
(5).
•
The Mode status LED (2) is lit blue.
11. Low Level input (LF IN)
The Low Level input allows you to connect an amplifier
with subwoofer output to the subwoofer, for example.
Note
•
Switch off the subwoofer before connecting a terminal
device.
•
Do not bend or crush the cable.
•
Connect your terminal device to the LF IN socket (12) on
the subwoofer using a 3.5-mm RCA cable.
•
Activate the LF IN mode by repeatedly pressing [MODE]
(5).
•
The Mode status LED (2) is lit yellow.
12. Multi-room
The subwoofer can be integrated as a client into an
UNDOK Multi-room group.
More detailed information can be found in the UNDOK
Guide.
13. Care and Maintenance
•
Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
•
If you do not use the product for a long time, turn off
the device and disconnect it from the power supply.
Store it in a clean, dry place out of direct sunlight.
14. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/or safety notes.