4
4. Getting Started
• Open the
battery compartment
(8), insert two AA batteries with the correct polarity and close the
battery compartment
(8)
.
5. Operation
Note
Hold down the button (5) or the button (6) to select the values faster.
5.1. Automatic date/time setting using the DCF signal
• Once you have inserted the batteries, the display is switched on, an acoustic signal sounds and the alarm
clock automatically starts searching for a DCF radio signal. During the search, the radio icon
will flash.
This process can take 3 to 5 minutes.
• When the wireless signal is received, the date and time are automatically set.
Display
Searching for the DCF signal
/
Display flashing
Active
Displayed continuously
Successful – signal is being received
Displayed continuously
Success – weak signal reception
Displayed continuously
Inactive – no signal reception
• Press and hold the
wave °C/°F
button (3) for approx. 3 seconds to start a manual search for the DCF radio
signal.
Note – Manual search
• The manual search is automatically aborted after 3-5 minutes.
• Using the
wave °C/°F
button (3) frequently will drain the battery. We recommend only using this
function to seek out an optimal location for the device.
