57
Operation
IR100
g
Operation
Each function of the device is selected via a menu consisting of
several levels.
Initial startup
Switch on the device. The main menu appears after a few sec-
onds.
The functions in the main menu are displayed as symbols on the
screen.
To go to a function or open a sub-menu, use the Navigation
rotary knob (8a) to select the desired function and subsequently
press the rotary knob (8b) (SELECT function = "Select" function).
During initial startup, the system prompts you to start the SETUP
WIZARD.
Select YES to begin with the setup.
NOTE
►
Detailed information on the SETUP WIZARD can be found in
the SYSTEM SETTINGS section.
If you are using a wired network, you can exit the SETUP WIZ-
ARD by selecting NO.
The system will then prompt you to start the SETUP WIZARD the
next time the device is switched on.
