53
Setup and connection
IR100
g
Electrical connection
For safe and trouble-free operation of the device, the following in-
structions on electrical connection must be observed:
■
The device is supplied with 9V AC voltage via the mains adapter
supplied. Always use the mains adapter supplied to connect the
device to the mains supply.
■
Before connecting the device, compare the connection data (volt-
age and frequency) on the rating plate with those of your mains
adapter. This data must correspond in order to avoid damage to
the device.
■
Make sure that the power cable does not come in contact with hot
surfaces or sharp edges.
■
Make sure that the power cable is not stretched tightly or twisted.
■
Do not allow the power cable to hang over edges (danger of trip-
ping).
■
If the device is not to be used for a longer period of time, discon-
nect the mains adapter from the mains supply.
Mains connection
Insert the mains adapter plug into the DC IN socket (14) on the
back of the device.
Insert the mains adapter into the mains socket.
Network connection
Wired network
Check
fi
rst of all whether the control lamps (LINK/ACT) of your
LAN connection or your router light up
NOTE
►
Information on the LAN connection can be obtained from the
user manual of the router manufacturer.
