6
8.2 Automatic station setting
The radio can search for stations automatically. The
analogue radio receiver's entire frequency range is
searched. The radio stops the search and starts playback
when it finds a station.
•
In FM mode, repeatedly press [ /
i
] to switch
between the volume control and the station setting.
•
Select the "Set station" menu item and confirm the
selection with [
VOLUME/ENTER/NAVIGATE
].
•
Turn [
VOLUME/ENTER/NAVIGATE
] (left: - 0.05 MHz /
right: + 0.05 MHz), to enter the required direction of the
scan and then press [
VOLUME/ENTER/NAVIGATE
] to
start the automatic station search.
8.3 Scan setting
The scan setting allows you to define whether stations
with a weak signal strength are to be included during the
automatic search.
Proceed as follows:
•
Press and hold [ ]/[ ] to access the "Search settings"
menu item.
•
Confirm your selection with [
VOLUME/ENTER/
NAVIGATE
].
•
Select "Strong stations only" in order to only stop during
the automatic search on stations with a strong signal.
Otherwise, the search run will stop at every station for
which a signal is received.
Note
By default, the "Strong stations only" method is
selected.
8.4 Presets
You can save up to 30 of your favourite stations for quick
and direct access.
8.4.1 Save presets
•
Set the station that you would like to save as a station
preset.
•
If the station is received, press and hold [
Preset
] on front
of the radio.
Press and hold
[ ]
An overview window with the station presets should open
after approx. 2 seconds.
•
You can switch between the station presets (1 to 30) by
turning [
VOLUME/ENTER/NAVIGATE
].
•
Press [
VOLUME/ENTER/NAVIGATE
] to save the station
to the desired station preset.
8.4.2 Retrieving presets
Press [
Preset
] to open the overview window with the list
of station presets.
Press and hold
[ ]
Use [
VOLUME/ENTER/NAVIGATE
] to select one of the
presets.
Note
•
Favourites cannot be deleted.
•
If all 30 station memory slots are filled and you wish
to save a new station, choose one of the occupied
slots. The station in this slot will be overwritten with
the new station.
