Hama 99123148 EWS-710, Operating Instructions Manual

Page: 4 / 26

2
G Operating instruction
Controls and Displays
1. LCD-Display
2. Hanging Hole
3. Battery compartment
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference. If
you sell the device, please pass these operating
instructions on to the new owner.
Package Contents
• Electronic weather station
• Outdoor sensor
• These operating instructions
Safety Notes
• The product is intended for private, non-
commercial use only.
• Protect the product from dirt, moisture and
overheating and use it in dry rooms only.
• Do not drop the product and do not expose it to
any major shocks.
• Do not open the device or continue to operate it if
it becomes damaged.
• As with all electrical devices, this device should be
kept out of the reach of children.
• Dispose of packaging material immediately
according to locally applicable regulations.
• Do not modify the device in any way. Doing so
voids the warranty.
Feature
• Time and calendar display
• Alarm and snooze function with blue backlight
• Low power reminding of both indoor and outdoor
machine
• Temperature °C/°F selectable
• The displaying range of indoor temperature:
0-50°C
• The displaying range of outdoor temperature:
-40-60°C
• Outdoor temperature with RF: up to 3 channels
maximum
• Radio controlled function with DCF edition
• DST time
• Record the max and min temperature of both
indoor and outdoor
• Records Min/Max Indoor humidity
• 3 levels of comfort index indication
• Weather forecast for 4 states: sunny, party-sunny,
cloudy and rainy
• 7 countries of languages displaying day: German,
Italian, France, the Netherlands, Spanish, Denmark
and English
• Operated with 2xAAA batteries (not included)
for clock and 2xAAA batteries (not included) for
transmitter
Powering on
Open the battery compartment cover and insert
2xAAA batteries according to the correct polarity
showed in the compartment for both clock and
transmitter. After powering on, the clock will
take about 3 minute to connect with the outdoor
transmitter. After that, it will start search radio signal.
It will stop searching signal till successfully received
or 7 minutes later.
Time setting
At normal time displaying mode, keep pressing
SET button for seconds till entering time setting
mode, and the setting digit will flash. Press UP or
DOWN button to adjust. The setting order is year
➞ month ➞ date ➞ language of day ➞ time zone
➞ 12/24hr ➞ hour ➞ minute ➞ exit. If there is
no more operation for 30 seconds, it will save the
existing setting and turn to normal displaying or
press SET button again to confirm the setting.
ALARM AND SNOOZE SETTING
At normal time displaying mode, press SET button
once to turn on the alarm function. When the alarm
is on, the signal of
is showed on the screen. Press
SET button again to turn off the alarm function.
At normal time displaying mode, hold pressing
ALARM button for seconds to enter the alarm
setting mode. The setting figure will flash.