44
Startup
Internet TV Box
g
WLAN connection: wireless local network
NOTE
►
You need a WLAN adapter to operate the device in a wireless network .
Configure the device as described in
„WLAN setup“ (p. 18)
.
Additional connections
Connecting USB devices
Switch on the device .
Connect the devices with USB interface (keyboard, mouse, USB stick, external hard
disk, WLAN adapter, . . .) to one of the USB connections (USB ports) (4) of the devices .
Inserting a memory card
Switch on the device .
Insert the memory card (e .g ., SDHC (up to 32 GB, MMC) into the SD card slot (7) on
the right side of the device with the labelled side facing backwards .
Connecting to a home cinema system
Connect the digital optical output with the help of a fibre optic cable (TOSLINK
coupling) to a home cinema system for high-quality audio transmission .
Startup
Inserting batteries into the remote control
Open the cover of the battery compartment on the back of the remote control .
Place the two AAA batteries supplied into the battery compartment and pay attention
to the correct polarity .
Close the cover of the battery compartment again .
NOTE
►
Change the batteries if the range of the remote control decreases or if the device no
longer reacts to all commands .