6.5 Mounting the cable manager
•
First remove the pre-assembled cable manager from the wall bracket.
•
Attach the cable manager to the arm of the bracket as shown above until you hear it click into place.
7. Adjustment & maintenance
Note
Never adjust the bracket alone. Seek assistance and help!
Note - tiltable / full-motion brackets
•
Ensure that no electrical cables are crushed or damaged during installation or adjustment.
•
During adjustment, ensure that the product is loaded symmetrically and that the maximum permitted carrying
capacity is not exceeded.
•
Check the strength and operational safety of the bracket and the load attached to it at regular intervals (at
least quarterly).
•
Clean only with water or conventional household cleaners.
