6
Deactivating Alarm 1/Alarm 2
• When ALARM 1 / ALARM 2 goes off, the corresponding alarm symbol (bell with AL1
/ bell with AL2) flashes.
• Press the alarm button
AL1
to switch off Alarm 1.
• Press the alarm button
AL2
to switch off Alarm 2.
• Moving your hand over the
SNOOZE/LIGHT
sensor (1) stops the alarm and turns
on the backlight for 5 seconds.
• The display for repeating the alarm
Z
z
flashes . The alarm will start again after 4
minutes.
5.4. Backlighting
• Press the
SNOOZE / LIGHT
button on the top of the clock to activate the backlight.
6. Care and Maintenance
Only clean this product with a slightly moist, lint-free cloth, and do not use aggressive
cleaning agents. Make sure that water does not get into the product.
7. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no warranty for damage
resulting from improper installation/mounting, improper use of the product or from
failure to observe the operating instructions and/or safety notes.
8. Service and Support
Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
9. Technical Data
RC 650
radio-controlled alarm clock
Power supply
2 x AAA batteries
Measuring range
Temperature
0°C to 50°C
(32°F to 122°F)
