If the previously described method for integrating the fan does not work, there is the option of
connecting the device via access point (AP mode).
•
In the first step, the WiFi indicator below the time must flash slowly. If this is not the case, press and
hold the WiFi button for approx. 5 seconds.
•
If the pairing process fails, you can try it again a few times. If this does not work, press the "WIFI UP"
button once. The display changes to "02 AP and WIFI".
•
"AP" flashes on the display and the WiFi indicator flashes once every 3 seconds.
•
Now proceed in the same way as described before. Before you tick "Next step", select AP mode in the
top right-hand corner.
•
The following screen appears:
•
Now tick the next step, click Next and select "Connect now" on the next screen. In the WLAN network
overview, select the network with the name SmartLife_XXXX.
•
You can ignore any error message that you are currently not connected to the Internet and then return
to the Hama Smart Home (Solution). Your weather station is now connected.
1
2
3