10
7. FM
After pressing [
mode
] repeatedly, activate operating mode
FM
:
[
mode
]
7.1 Scan setting
The search run setting allows you to determine whether
stations with low signal strength are ignored during the
automatic search run.
Proceed as follows:
[
menu
]
Scan setting
•
To have the search run stop only at stations with high
signal strength, select
Strong stations only
. Otherwise,
the search run will stop at every station for which a
signal is received.
7.2 Automatic station search
•
Press and hold [
enter/navigate
] until the automatic
station search starts.
•
The radio stops the search and starts playback when it
finds a station.
•
Press [
enter/navigate
] to continue the search until the
next station is found.
7.3 Manual station search
Bei manuellen Sendereinstellungen haben Sie die
Möglichkeit, die gewünschte Frequenz selbst festzulegen
und auch Sender zu empfangen, deren Sendesignal bei der
automatischen Sendersuche zu schwach war und deshalb
nicht berücksichtigt wurde.
•
Drehen Sie [
enter/navigate
] (links: - 0.05 MHz/
rechts: + 0.05 MHz) bis die gewünschte Frequenz
angezeigt wird. Warten Sie einen kurzen Augenblick und
die Wiedergabe des empfangenen Sendesignals beginnt.
7.4 Favoriten
You can save up to 10 of your favourite stations for quick
and direct access.
7.4.1 Save favourites
•
Set the station that you would like to save as a favourite
station preset.
•
If the station is received, press and hold [
memory
] on
front of the radio.
[
memory
]
An overview window with the station presets should open
after approx. 2 seconds.
•
You can switch between the station presets (1 to 30) by
turning [
enter/navigate
].
•
Press [
enter/navigate
] to save the station on the
desired station preset.
