3
• Supports wirespeed and flow regulation
The Hama switch has an integrated non-blocking and
store-and-forward architecture which enables it to
provide maximum speed for your network. The switch
ensures reliable data transfers thanks to the integrated
flow regulation for full duplex and half duplex mode.
• Supports auto-MDI/MDIX and auto-sensing
The Hama switch supports PNP (plug and play) and
features the auto-MDI/MDIX function. You can connect
the Hama switch to computers or other network-capable
terminal devices without complex configurations; it
doesn’t even matter which network cable you use. You
can either use a Cat5e patch cable (1-to-1) or a crossover
network cable. The switch will automatically choose
the right setting for the type of cable used without you
having to configure it.
• Power-saving mode
The Hama switch features advanced energy-saving
technology. This technology helps reduce the device’s
power consumption if no data is being transferred or if a
connection is not being used.
7. Installation
Warning
• Only operate the product from an approved socket
that is connected to the public power supply. The
socket must be installed close to the product and
must be easily accessible.
• Disconnect the product from the power supply using
the On/Off switch – if this is not available, unplug
the power cord from the socket.
• If using a multi-socket power strip, make sure
that the total power consumption of all connected
devices does not exceed the power strip's maximum
throughput rating.
• If you will not be using the product for a prolonged
period, disconnect it from mains power.
Using the example of a typical configuration (Pic.1):
• Connect the switch to your DSL router/modem.
• Connect your computers/notebooks to the switch.
• Connect the power cable of the switch to a properly
installed and easily accessible mains socket.
Note
• Of course, you can also connect other network-
capable terminal devices such as printers, IP
cameras or external network hard drives.
8. Specifications
Standards
IEEE 802.3, IEEE 802.3u,
IEEE 802.3x, IEE802.3az
Protocol
CSMA/CD
Connections
5 or 8 10/100 Mbps, autonegotiation,
auto-MDI/MDIX
Special features
Half and full duplex
MAC address learning
Auto-sensing
Memory buffer
448 kilobytes
Data rate (max.)
10/100 Mbps at half duplex
20/200 Mbps at full duplex
Transfer method
Store and forward
Permitted
humidity
90% (non-condensing)
Operating
temperature
0 to 40 degrees Celsius
Dimensions
12,4 x 7,2 x 2,4 cm
Specifications in accordance with
Regulation (EU) 2019/1782
Manufacturer’s name or
trade mark, commercial
registration number and
address
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim
Model identifier
DYS605-050120W-3
Input voltage
100–240V
Input AC frequency
50/60Hz
Output voltage/
Output current/
Output power
5.0VDC / 1.2A / 6.0W
Average active efficiency
77.0%
