Hama 00040072, Operating Instructions Manual

Page: 9 / 132

7
7.2 Activating the learning mode
1. Press and hold the [MUTE] and [VOL+] buttons
simultaneously for approx. 3 sec. until the
status LED lights up continuously.
2. Enter the code [9] [8] [0], the status LED flash-
es 2 times and then lights up permanently.
3. The universal remote control is now in learn-
ing mode.
7.3 Transferring the button function
1. Press the button on the original remote control
whose function you want to transfer. To
confirm that the command has been received,
the status LED of the universal remote control
flashes.
2. Now press the button on the universal remote
control to which the function is to be trans-
ferred.
3. The function LED of the universal remote
control flashes 3 times for confirmation and
then lights up permanently again. The new
function is now saved.
4. To transfer the functions of additional buttons,
repeat these steps.
5. Press the [SETUP] button to save all taught-in
functions and exit the learning mode.
Note
When changing the batteries of the universal remote
control, the functions of the taught-in buttons are
retained.
7.4 Deleting taught functions
7.4.1 Deleting a taught function
1. Press and hold the [MUTE] and [VOL+] buttons
simultaneously for approx. 3 sec. until the
status LED lights up continuously.
2. Enter the code [9] [8] [1], the status LED flashes
2 times and then lights up permanently again.
3. Press the button whose function you wish to
want to delete. The status LED flashes 3 times
and the desired function is deleted.
7.4.2 Deleting all taught functions
1. Press and hold the [MUTE] and [VOL+] buttons
simultaneously for approx. 3 sec. until the
status LED lights up continuously.
2. Enter the code [9] [8] [2], the status LED flashes
2 times and then lights up permanently again.
3. Press the [SETUP] button, the status LED
flashes 3 times and all taught-in functions are
deleted.
8. Maintenance
• Never use old and new batteries in the universal
remote control at the same time, as old batteries tend
to leak and can lead to a loss of performance.
• Never clean the universal remote control with
scouring agents or harsh cleaning agents.
• Keep the universal remote control free of dust by
cleaning it with a dry soft cloth.