Connecting the microSpider2 Industrial to your PC
1.
Disconnect your computer from your network and turn it on.
2.
Connect one end of the red crossover LAN cable into the “LAN” connector of the microSpider2.
3.
Connect one end of the white USB cable into the “USB” connector of the microSpider2.
4.
Connect the other end of the LAN cable into your computer LAN port.
5.
Connect the other end of the USB cable into a free USB port on your computer. (No drivers are
required nor will be installed.)
6.
Wait 60 seconds.
7.
Open a browser program on your PC and request the following page:
8.
Log in, User Name is “user” and Password is “changeme” (without inverted commas)
Please note: while your PC is connected as described above, it will supply the power to the
microSpider2. Therefore, there is no need to minimise PC connection times – the external battery
will be unaffected by their duration. The only exception to this is modem operation.
NOTE: Steps 3 and 5 are not required for microSpider2 unit
s with their LAN port mode selector set to “PWR”.
Please refer to the “LAN Power Selector” section earlier in this document for more details.
USB LAN