7 End of life
7.1 Removing the product from use
NOTICE
NOTICE
All installation, commissioning, and maintenance work must only be carried out by
qualified personnel.
NOTICE
NOTICE
All electrical work must only be carried out by qualified personnel.
1. Disconnect the wiring.
2. Disconnect the duct connection.
3. Disconnect the water connections.
4. Dismount the unit.
7.2 Recycling and waste disposal
Carry out all recycling and waste disposal in accordance with the law and regulations of each country. Observe the
specific requirements enforced by the legislation and local authorities of each country. Keep the environment clean.
Packaging waste
Packaging materials that can be recycled are listed below. They must be disposed of in conformity with existing
local regulations.
▪ Polyethylene: outer protective film
▪ Cardboard: angle protections, cardboard boxes etc.
▪ Wood: pallet, plywood etc.
Electronic and other components
Any electronic and other corresponding components of the product should be assessed for the most suitable
recycling route in accordance with local regulations.
Recycling after decommissioning
Recycle the product and its components upon decommissioning. Follow the local laws and regulations when
disposing of electrical components and steel materials. The following instructions are general.
▪ Disconnect and dismount all electrical and/or pneumatic components (such as actuator, junction box,
switches, cables etc.).
▪ Recycle electronic and other corresponding components of the product in accordance with WEEE provisions.
Halton Rex Expander (RXP) - Installation, commissioning, and maintenance guide
24
1.0
All rights reserved ©Halton
