4
EcoloAir Installation Manual
EA
OMSI/0620
09/re
v1/EN
AIR FILTER INSTALLATION
1. Care should be taken to install the filters in the proper sequence. They should be installed in the following
order:
a) Beginning at the exhaust inlet, the first filter (Pre Filter) is the Merv 7
b) Next is the filter labelled Medium Filter, Merv 14
c) Followed by the filter labelled Absolute Filter, Merv 16
2. All filters should be installed taking note of the arrow indicating the directions of air flow and clamping into
position.
3. It is important that all the filters be properly seated against the support mullion as shown in figure 4 and 5.
ECOLOAIR UNIT
FILTER SUPPORTING
FRAME
PRE FILTER
MERV 7
AIR FLOW
(EXHAUST FILTER INLET)
MEDIUM FILTER
MERV 14
FIGURE 4
FILTER AIR SEAL
GASKETING
CLAMP HANDLE TAPED
TO SIDE OF FILTER FOR SHIPPING
ABSOLUTE FILTER
MERV 16
FILTER CLAMP
(PULL OUT TO LOOSEN FILTER
PUSH IN TO TIGHTEN FILTER
AGAINST AIR SEAL)
CENTRE MULLION
ECOLOAIR UNIT
CLAMP
HANDLE
FILTER
CLAMP
WELDED
CLAMP
AIR FLOW
FIGURE 5
FILTER AIR SEAL
GASKETING
CLAMP HANDLE TAPED
TO SIDE OF FILTER FOR SHIPPING
ABSOLUTE FILTER
MERV 16
FILTER CLAMP
(PULL OUT TO LOOSEN FILTER
PUSH IN TO TIGHTEN FILTER
AGAINST AIR SEAL)
CENTRE MULLION
ECOLOAIR UNIT
CLAMP
HANDLE
FILTER
CLAMP
WELDED
CLAMP
AIR FLOW
