2
EcoloAir Installation Manual
EA
OMSI/0620
09/re
v1/EN
FIGURE 1
FIELD CONNECTION OF FILTER AND FAN MODULES
FILTER HOUSING
FAN HOUSING
TOP ELEVATION
BOTTOM ELEVATION
BLANK SIDE INSULATED LINING
AND SKIN (STANDARD)
BLANK SIDE (INTERIOR INSULATION
LINING) AND SKIN OPTIONAL
CONNECTION FLANGE
INTERIOR AND BLANK SIDE
INTERIOR BOTTOM FLOOR
CONNECTION OUTLET END
FILTER ACCESS SIDE
REMOVE TO GAIN ACCESS TO
BOTTOM FLANGE CONNECTION
FILTER OUTLET END MULLION
WITH CONNECTION FLANGE
SEE NOTE FOR
METHOD OF CONNECTIONS
INTERIOR BOTTOM FLOOR
PANEL TURNED UP AT
FAN INLET
GASKET TO BE PLACED
BETWEEN FLANGES
FILTER TOP INSULTATION LINING
(STANDARD 1)
INTERIOR FILTER TOP PANEL
INTERIOR CONNECTION DETAIL
LOCATED @ TOP OF FILTER
OUTLET IF AN INLET
B FAN TOP INSULATION LINING
(OPTION FOR EXTERIOR ICN)
INTERIOR FAN
TOP PANEL
BOTTOM FLOOR PANEL
WITH TURNED UP FLANGE
AT FAN INLET
INTERIOR FLOOR CONNECTION
FLANGE FILTER OUTLET
4” STRUCTURAL FLOOR BASE
PLAN VIEW
INLET PANEL
CONNECTION
FLANGE
ACCESS SIDE
INLET GASKET
(PROVIDED BY
FACTORY)
FAN BOTTOM
PANEL
TURNED UP
FLANGE
FAN TOP PANEL
(LESS INSULATION)
FILTER BLANK
SIDE CONNECTION
BY CONTRACTOR
FILTER TOP
CONNECTION POINTS
FILTER TOP
INSULATION SKIN
DRILLING OF HOLES
FOR BOLTED CONNECTIONS OR
USE OF SELF TAPPING SCREWS
BY CONTRACTOR. 1/4” - 20 ON 6”
CENTERS TYP. GASKETED WITH
SILICONE TAPE.
FILTER FLOOR PANEL
FILTER FLANGE ACCESS SIDE
CONNECTION POINT
FIGURE 1A
DRAWING FOR: FILTER MODULE TO FAN SECTION OR
FILTER MODULE TO ODOR CONTROL TO FAN SECTION
NOTE:
BASED ON THE SIZE OF
THE UNIT, THE CONNECTING
FLANGES COULD BE INTERNAL
OR EXTERNAL.
