10
OVLERQ*D OVLSRQ*D OVLESRQ*G OVLSERQ*G
97881C - (Rev. E - 4/07)
TROUBLESHOOTING & MAINTENANCE
Orifice Assembly:
Mineral deposits on orifice can cause
water flow to spurt or not regulate. Mineral deposits may
be removed from the orifice by poking with a small round
file not over 1/8” diameter, or using a small diameter wire.
DO NOT
file or cut orifice
material.
Stream Regulator:
If orifice is clean, regulate flow as in
Step 10 of the installation instructions. If replacement is
necessary, see parts list for correct regulator part number.
Actuation of Quick Connect Water Fittings:
Cooler is
provided with lead-free connectors which utilize an o-ring
water seal. To remove tubing from the fitting, relieve water
pressure, push in on the gray collar while pulling on the
tubing. (See Figure 19) To insert tubing, push tube
straight into fitting until it reaches a positive stop (approxi-
mately 3/4”).
To preserve the quality and keep
this AZTEC GOLD finish clean and
spot free, clean this surface with
only mild detergent or window
cleaner and polish with a soft
cloth. DO NOT use any abrasive
cleaners or harsh chemicals.
They WILL damage the finish!
Figure 19 – Quick Connect Fittings
Figure 21 – Regulator Mounting Mechanism
Figure 20 – Push Arm Mechanism
28
22
29
26
Stream Height Adjustment
30
29
26
31
25
27
