Halotherapy Solutions Halo STAR, Owner'S Manual, Page: 19 / 48

halotherapysolutions.com
19
Halo STAR
Assembly Instructions Cont’d
14 - LOCATING AND PLUGGING IN POWER CORD
15 - INSTALLING THE HALOTHERAPY SOLUTIONS HALOGENERATOR
16 - CONTROLLING THE LIGHTS
17 - AUDIO SYSTEM
The power cord comes out of the roof of the Halotherapy Cabin. It is located in the trap door in the roof at the
rear left facing corner. The power cord will plug into the appropriate electrical outlet. The power cord is 8’ long.
See page 44, “Installing the Halotherapy Solutions Halogenerator” to install the Halogenerator in the cabin.
1. Locate the gold button on the right facing side wall.
2. This button controls the inside lights of the cabin. Press the switch once to
turn the lights on. Press it a second time to turn off the light
Your Halo STAR Cabin is equipped with stereo speakers that can be accessed by Bluetooth.
1. Your Halo Star Cabin is Bluetooth ready. To connect audio via Bluetooth:
A) Open your Bluetooth enabled phone, tablet or computer and search for surrounding Bluetooth devices to
find a device called Infrared Sauna . The pairing code for this device is 0000 .
2. There is a 3.5mm jack in the charging compartment that is connected to the speakers in your cabin. You can
connect any audio to the speakers using this connection.
Note : We do not recommend using an extension cord for your Halotherapy Cabin.
Please plug the Halotherapy Cabin directly into the wall receptacle.