Getting Started
Quickly press and release the power button to check how
much battery power the HALO charger has left. One blue
light indicates 0%-33% battery life, two blue lights indicate
34%-66% battery life and three blue lights indicate 67%-
100% battery life.
Turning On/Off the HALO Pocket Power 5500
Press and hold down the power button for three seconds to
turn the HALO charger on. The LEDs will remain lit when the
power is on. Press and hold the power button for three
seconds to then turn HALO charger’s power off.
Charging the HALO Pocket Power 5500
To recharge the HALO charger pull the built in USB Cable,
found next to the words “USB in” on your HALO charger, out
from the top of the device. This built in USB cable is the only
cord that can be used to recharge your HALO charger. Once
this cable is pulled out from the HALO charger, plug the USB
input connector into the standard USB port on your com-
puter or an AC wall adapter that accepts USB connections.
When recharging your HALO charger the three LED’s will
blink upwards from the bottom of the HALO charger where
the Power Button is located. When fully recharged all three
blue LEDs will remain a solid blue color.
Charging Your Personal Electronic Device
There are two methods that can be used to charge your
personal electronic device. The first method involves using
the supplied USB charging cable. Plug the USB connector
into the bottom of your HALO charger where it reads “5V/2A
out”. Find the tip that fits with the electronic device you are
going to charge and plug it into the circular DC output end
of the USB cable. Plug the tip into the device you are going
to charge and make sure to turn the HALO charger on. The
second method involves using the built in micro USB
connector. You can find this cord to the right of the words
“Micro USB out” on the HALO charger. When charging your
device, the HALO chargers three blue LEDs will begin to blink
from the top light downwards.
HALO Pocket Power 5500 Intelligent Recognition
The HALO charger is programmed with an intelligent
recognition system to achieve a higher compatibility for
charging different electronic devices. If it does not charge
your device when the USB cable is plugged into your device,
please restart the power charger while it is still connected to
your mobile phone.
Features
- Lithium Polymer battery pack with high safety and stability.
- Unique Equilibrium PCBA protection ensures longer device
life.
- Lower static power.
- Overcharge protection.
- Over discharge protection.
- Short circuit protection: if any of the output ports meet a
short circuit, the HALO charger will shut down
automatically; recharge it to restart the HALO charger.
Summary of Contents for Pocket Power 5500
Page 1: ...Operating Instructions...
