Installing the Primer band
Dry off the back side of the Primer band. Using your thumb and pointer finger, pinch the Primer band from the
textured circles on the back. While pinching, insert the Primer band into your headset by lining up the green arrow
on the back of your Primer band with the corresponding recessed arrow on your headset. Use your thumbs to
press the left and right sides of the Primer band against the headset to secure it. Use the alignment lines to verify
that your Primer band is inserted properly.
Line up the arrow. Check the alignment lines.
Placing Halo Sport 2 on your head
With the Primer band installed, spread the headset wide and place it directly over the top of your head so that the
Primer band’s nibs are the first thing to make contact with your head.
The headset should look vertical on your head when standing up straight. To be exact, you can measure the
distance from the bridge of your nose to the bump on the back of your head and place Halo Sport 2 at the halfway
point.
9
Halo Neuroscience | 735 Market St, 4th floor, San Francisco, CA 94103 | [email protected]
