NOTE
TO HOME OWNER
5
HALO WATER SYSTEMS, LLC COPYRIGHT 2020 ALL RIGHTS RESERVED
Conditioning -
What to Expect & Best Practices
SPOTTING
•
Spotting is normal
Remember, the beneficial minerals have been conditioned and left in your water. These conditioned
minerals will be easier to wipe up than unconditioned minerals, however if water is left to evaporate
continuously on hard surfaces, scale will begin to form. The solution is to not allow water to
evaporate on hard surfaces.
•
Glass shower doors
Years of scale formations on glass doors can etch the surface of the glass and cause soap and
minerals to stick in those fissures. Using RainX® or a similar product in addition to a squeegee on
shower doors can seal pores on the glass surface causing water to sheet. This greatly reduces spots
and scale formation.
•
Dishwasher
In leaving the beneficial minerals in your water this may cause some occasional spotting on dishes
and glassware. We recommend using Lemi-Shine© liquid rinse aid. This is an all natural product
and will not leave any chemical residue behind.
•
Toilets
HALO Water is highly filtered to remove chemicals and disinfectants. When exposed the open
atmosphere of a toilet bowl the water can grow mildew and bacterial. This is especially true with
low flow toilets that do not fully flush away deposits and toilets that are unused for extended
periods of time. Use a product such as CLR to remove deposits. Flush ‘n Sparkle® is a
recommended to introduct chlorine to ONLY the toilet bowl without the chlorine effecting the toilet
gaskets, flapper or other components.
HARDNESS
•
Total Dissolved Solids
TDS is the measurement of all dissolved solids in your water, including but not limited
to minerals The conditioning process alters the scale forming minerals so they are no
longer aggressive or harmful, but hardness tests cannot determine the difference
between conditioned minerals and raw minerals and are ineffective in determining the
performance of the HALO conditioning system. The TDS may increase slightly during
the descaling process.
•
Boiling or Vaporizing Water
When boiling or vaporizing conditioned water and you may see white deposits form
on the bottom of the pan or appliance. This is a normal reaction between conditioned
minerals and extreme heat. If this causes a problem for humidifier or vaporizer use
distilled water or contact the manufacturer for more information.
•
Slippery Water
The HALO Conditioning System uses no sodium or potassium. This is why you will not
experience that slimy, slippery feeling on your skin and hair. The slippery feeling is caused
by chemical additives. Instead the HALO Conditioning System provides you
with bottled water quality water.
HALO Water Systems • 2075 Corte Del Nogal, Suite S, Carlsbad, CA 92011 • 800-591-0538
HALO WATER SYSTEMS, LLC COPYRIGHT© 2021 ALL RIGHTS RESERVED
Summary of Contents for H2zero
Page 1: ...OWNERS MANUAL INSTALLATION GUIDE...
Page 2: ......
