Halo ACDC BOLT 58830, Operating Instructions Manual

Page: 16 / 20

HALO BOLT ACDC 58830
Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can
safely jump start your car or charge your laptop. In addition, you can
use it to charge your phone, tablet or other electronic devices! The
HALO BOLT ACDC 58830 also features a convenient LED floodlight.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specifications
Warranty and Contact Information
INCLUDED ITEMS
- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO BOLT ACDC 58830.
CHARGING THE HALO BOLT ACDC 58830
To recharge the HALO BOLT ACDC 58830, use the provided AC wall
charging adapter cable, and plug the AC adapter tip into the charge
input.
Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC
58830 will automatically begin charging. When the HALO BOLT ACDC
58830 is fully charged, all four indicator lights will be solid green (This
could take up to 9 hours).
When your HALO BOLT ACDC 58830 is on, the LED indicator lights will
display the power level.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT ACDC 58830
1. Plug the jumper cables into the jump start output on the
HALO BOLT ACDC 58830.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
JUMP START TROUBLESHOOTING TIPS CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.
2. Turn on the USB charging feature by pressing and releasing the
USB Power ON/OFF Button on the HALO BOLT ACDC 58830.
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT ACDC 58830 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT
The floodlight can be turned on and off by simply pressing and
releasing the floodlight ON/OFF button. The floodlight will
automatically turn off after 2 hours of inactivity.
SPECIFICATIONS
Battery Cell: 3x Li-Polymer 5300mAh
Battery Pack Power: Contains a 58830 mWh battery
Input: DC 14V/0.85A
USB Output: 2x USB 5V/2.4A
AC Output: 1x AC output port 115V (65 Watts)
Dimensions: 182 x 97 x 40mm
Weight: 754 g
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certified peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certified peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the first 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and fitness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
16 | POWER YOUR LIFE
CHARGING A LAPTOP (VIA THE AC OUTPUT PORT)
1. Connect the AC power plug from your laptop (or other electronic
device which is rated at 65 watts or less) into the AC output port of the
HALO BOLT ACDC 58830.
2. Press the AC Power ON/OFF Button and wait for a solid green light
LAPTOP CHARGING TROUBLESHOOTING TIPS
SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, fire which may result in serious
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, fire or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may
cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of
flammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting
vehicle.
• Keep your HALO BOLT ACDC 58830 dry and away from moisture and
corrosive materials. The HALO BOLT ACDC 58830 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain,
or snow.
• Keep your HALO BOLT ACDC 58830 away from heat sources, including
open flames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging
device may present a risk of fire or chemical burn if mistreated. Do not
expose to fire or excessive temperature. Do not expose to heat above
212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
fire extinguisher.
• Your HALO BOLT ACDC 58830 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT ACDC 58830 during operation.
• Do not disassemble your HALO BOLT ACDC 58830. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or fire hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT ACDC 58830 by the specified method
with the specified charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
ACDC 58830. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT ACDC 58830, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT ACDC 58830.
• Do not clean your HALO BOLT ACDC 58830 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT ACDC 58830’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F
(-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)