Halma Wagtech Palintest Potatest Go Manual Download Page 39

Page: 39 / 48

• Wagtech Incubator
• High performance

Lead Acid battery

• Mains charger with

international adapters, vehicle
socket battery power lead,
crocodile clip power leads

• DC power cable
• Petri dish rack
• 20 Aluminium

re-usable petri dishes

• Membrane Filtration assembly

including bronze disc

• Pistol grip vacuum pump

with silicone tubing

• 5 Media Measuring

Devices (MMDs)

• 38.1g Membrane

Lauryl Sulphate Broth

• 5 Pasteur pipettes
• Pen
• Hand lens
• Forceps
• 200 sterilised and

sealed membrane filters

• 200 absorbent pads
• Absorbent pad dispenser
• Stainless steel sampling cup

with inert sampling cable

• Polypropylene 250ml beaker
• Sterilisable work surface
• Cuvette brush
• Dilution tube
• 2 crush/stir rods
• De-ion pack
• Instructions

Removable Water
Safety Kit including:

• Contour Comparator

Disc for Free and Total
Chlorine (0-5mg/l)

• 4 comparator cuvettes

• Comparator reagents

for 250 tests for Free
and Total Chlorine

• Double length

Turbidity Tube

• Pocket pH Sensor and

pH calibration buffers

Potatest

Kit Contents

The

Potatest

incubator is designed for incubation of microbiological samples in petri dishes.

Follow the instructions regarding connection of power cables carefully and only use genuine
Palintest cables/chargers. Using the

Potatest

incubator in a manner not specified by

Palintest may affect safe performance and invalidate warranty.

Test Protocols

37 and 44°C temperature selections, user selectable
time period, adjustable automatic resuscitation period option

Temperature Stability

±0.1°C

Temperature Control

Laser-trimmed thermistor pair with automatic temperature validation

User Interface

On screen and audible prompts available in English, French, Spanish and Chinese

Data Log

Last five incubation cycles report, view up to
100 incubation cycles via Wagtech Link app

Connectivity

Micro-USB connection to Windows devices

Size

110 x 120 x 145mm

Weight

675g

Power Supply

Sealed Lead Acid battery:12V DC/2A/30VA Mains power
adapter: 100-240V AC/50-60 Hz/500mA/50VA.
Vehicle and external battery connections provided

Power Consumption

High thermal efficiency heating system, 5 full incubation
cycles from fully charged battery under standard conditions

IP Rating/Protection

Not specified. Do not immerse or clean using aggressive or
corrosive cleaning agents. Do not steam clean the incubator

Humidity Rating

Up to 90% RH at 35°C (MIL-STD 810G)

Temperature Rating

0-50°C

Maximum Sound

EN61010-1, clause 12.5.1. A-weighted limit 79dBA, user prevented

Pressure

from setting higher volume

Wagtech Incubator

Appendix 3 - Technical Specifications

Summary of Contents for Wagtech Palintest Potatest Go

















































Search results

Summary of Contents for Wagtech Palintest Potatest Go

Reviews:

Related manuals for Wagtech Palintest Potatest Go

Brands by name

Popular brands

Halma Wagtech Palintest Potatest Go, Manual

Search results

Summary of Contents for Wagtech Palintest Potatest Go

Reviews:

Related manuals for Wagtech Palintest Potatest Go

Brands by name

Popular brands