SENSITRON
A Halma Company
MTEX4899
SMART S-MS MED
Manuale (IT)
P. 33/36
Type of error
Possible cause
Corrective action
Flash error
Flash memory error
- Reset the gas detector with the
calibration keypad.
- If not enough, switch off and on the
gas detector.
- If not enough, contact Sensitron.
Ram error
Ram memory error
I2C error
I2C error
Watchdog error
Watchdog error
ADC error
ADC reading beyond max/min limits
Internal power supply error
Internal power supply beyond max/min
limits
Fram head error
Fram sensor head error
Internal reference error
Internal reference beyond max/min limits
Not valid analogue output
Analogue 4-20 mA is not valid for gas
detector model
Detector configuration error
Error of hardware configuration
Part number
Description
STS/CKD+
Hand-held calibration keypad
STS/CKD-OLED
Hand-held calibration keypad with OLED display
STGD/AD3
Adapter to upgrade the protection from G to GD
ZMCAP/123
Stainless steel calibration adapter for all of Sensitron gas detectors. It allows the
right quantity of gas inlet to flow to the detector. It comes complete with adapters
to fit on the detectors' heads.
ZM/TEST/3
Permanent rain shield/test adapter
SL517
Stainless steel collector for gas detector with EPL Gb
SL647
Stainless steel weather protection roof, to protect gas detectors with vertical
mounted sensor head.
SL673
Stainless steel 2” mounting bracket
STG/AD.COND
Duct mounting adaptor
ST.R5M
Remote kit to separate he head from the transmitter up to 5 m (cable not
supplied)
Table 7
Errors which stop the equipment, the user has to reset the gas detector
Table 8
Table of available accessories that can be purchased separately. Please contact Sensitron for further information
8. Repair
9. Packing instructions
10. Accessories
Repairing from the user side is not allowed; the user has to return the entire
equipment to the manufacturer with the warranty coupon for repairing in
paragraph 12.
For further information see EN 60079-19.
To grant a stout protection against impacts we recommend using the original
package or protect the device with bubble wrap sheets.