1: Setup
Unpacking the HL-2000-CAL
►
Procedure
1. Unpack your lamp assembly and power supply carefully. Although the lamp is rigidly mounted,
dropping this instrument can cause permanent damage.
2. Inspect the outside of the instrument and make sure that there is no damage. Do not use the
instrument if damage is present.
3. Use this instrument in a clean laboratory environment (see
Contents
Your DH-2000-CAL package should contain the following:
DL-2000-CAL unit
1 Switching AC adapter for stabilizing power
1 Power cord for supplying power to the power supply
2 Lamp Calibration Reports; one for using the HL-2000-CAL with a bare fiber and one for using
the HL-2000-CAL with a CC-3 cosine-corrected irradiance probe
1 disk that holds files for both lamp calibration reports
1 Allen wrench for adjusting the inner barrel of the SMA connector
2
000-10000-060-02-0505
