HOW TO USE
BEFORE USE
• Remove shipping package, tape, etc, and leave doors open for a while.
• The unit is cleaned before shipment. However, please clean the compartment interior after delivery.
• Please insert power supply plug into the wall outlet.
• Allow the unit to operate for about l hour to reach temperature before placing items in the cooler.
WAIT 5 MINUTES OR MORE BEFORE RE-STARTING
• Restarting the unit immediately after it has been turned off may cause fuses to blow and activate the
circuit-breaker, the compressor may be overloaded, and/or other damage may occur.
TEMPERATURE ADJUSTMENT
• The thermostat was adjusted using temperature at factory. To adjust it, turn right to reduce temperature.
To raise the temperature, turn it left. Excessive refrigeration will increase electricity consumption
unnecessarily.
DRAIN TRAY
• Defrosting is performed automatically and drain water is collected in the drain tray.
• Water in the drain tray is evaporated automatically. In humidity, there may be a large amount of
water in the drain tray, so please throw away drain water once a day.
EFFICIENT USE
Please follow the below instruction, you could save energy.
• To prevent cold air from escaping, open and close the door quickly and keep the door opened
for as short a time as possible.
• Please install the unit in the place which is well-ventilated.
SHELF HEIGHT ADJUSTMENT
The shelf height can be adjusted.
Arrange the shelves in accordance with the dimensions of the items to be placed in the cooler.
4
Summary of Contents for HC1BK
Page 1: ...HC1BK HC2BK HC2BK SD Undercounter Bottle Cooler...
Page 2: ......
