Hall Technologies March 30, 2023
Page 33 of 39
WI-FI SETTINGS
UI Element
Description
Band
•
5G: Configure the device’s frequency band as 5GHz.
•
2.4G: Configure the device’s frequency band as 2.4GHz.
By default, the device works at 5GHz. If your wireless devices don’t support 5GHz,
configures the frequency band as 2.4G before connecting them to the device via Miracast.
Channel
By default
,
the Channel is set to Auto. If a different wireless channel is desired, uncheck
Auto and select the desired channel.
Soft AP
Click to enable/disable the switcher’s soft AP function.
Soft AP Router
•
Enable: Enable the device’s soft AP router function so that wireless devices connected
to soft AP can access the internet (in the condition that the LAN port of the device is
connected to the internet).
•
Disable: Disable the device’s soft AP function to prevent wireless devices connected to
soft AP from accessing the internet.
Note:
(1)
Before you use this feature, ensure the soft AP function is enabled.
When the device’s IP mode is set as Static, you must configure the LAN port’s gateway and
DNS correctly so that soft AP router runs properly.
Soft AP Password
Configure soft AP password.
Note
: The soft AP password must be 8~20 characters in length, including letters, numbers,
“_” or “-”.
Apply
Click to apply setting changes.