Hall Technologies March 30, 2023
Page 32 of 39
VIDEO SETTINGS
UI Element
Description
Output Timing
Set the output resolution for HDMI Out. Two operation methods are offered.
Auto
: select to output the maximum resolution supported by display based on the
display’s EDID. E.g. If display supports up to 4K@30Hz, the device outputs 4K@30Hz.
Resolution range list
: select a desired output resolution from the drop-down menu to
output this fixed resolution.
By default, it's set as
Auto
.
Output HDCP
Set the HDCP capability for HDMI Out and HDBT Out.
Follow:
Set the output HDCP of HDMI Out to follow the HDCP capability of the video
input.
HDCP 2.2 or 1.4:
Set the output HDCP of HDMI Out to HDCP 2.2 or 1.4.
By default it is set as Follow.
Screen
By default, the output screen is set to single screen. If two sources are connected such as a
laptop and a mobile device the setting
Split Screen
can be selected to show both sources
side by side.
CEC
Click to enable/disable CEC control on display.
Default setting: Enable
One Touch Play
The display will turn on with the correct CEC command when a source is connected to HT-
CALIPSO.
Standby
The display will turn off with the correct CEC command when the HT-CALIPSO goes into
standby mode.
Apply
Click to apply setting changes.
CEC Test
Used to test the code entered for
One Touch Play
or
Standby
.