13
13
MODEL VSA-X21
HDBT Bypass
The HDBT Bypass control shows the device current
HDBT Bypass state as well as being able to control the
ON or OFF state.
Factory default is OFF.
When enabled, any characters received on the HDBT IN will be bypassed
directly to Serial port #2.
NOTE:
The ‘Baud’ and ‘Parity’ controls do not apply when this control is enabled.
The baud rate used is whatever the HDBT TX device used.
The HDBT RS232 stream will NOT be able to control the VSA-X21 in this mode.
X21-UI
The X21-UI control setting shows the device current setting
as well as being able to control the ON and OFF states.
Factory default is ON
When OFF, no special processing is done.
When ON, the device will send to and receive commands from the installed
X21-UI for control.
Device Info
Device ID#
The Device ID# control shows the device ID#.
Factory default is 0.
Current ID #
The Current ID# control shows the device ID#. Factory default is 0.
