2-Channel HDMI 2.0 Splitter
© Copyright 2020 Hall Research, LLC.
5
3.0 Setup
Installation
Connect the HDMI source to the “INPUT” port.
Connect each HDMI display to the “VIDEO OUT” ports.
Connect and securely attach the included power supply to the power jack.
Optionally,
connect the “AUDIO OUT” to an amplifier or audio device.
When no display devices are detected on the “VIDEO OUT” ports, the
default internal EDID will be seen by the HDMI source.
o
The external display EDID is read only on power-up. By default,
the EDID from Output 1 is used. If Output 1 is not available,
Output 2 is used. If neither is available, the internal EDID is
used.
Optionally,
connect the RS-232 to a PC or serial control device.
Optionally,
use the “MAX OUTPUT RES” dipswitches to downscale a 4K
image to 1080p for one or both of the displays, if needed.
NOTE
If the video source sends multi-channel audio, the 3.5 mm
analog audio output is muted and the extracted audio output
will only be available as digital on the TOSLINK output.
