manualshive.com logo in svg

Hall Research Technologies CC-101, User Manual

Share
Download
Hall Research Technologies CC-101 User Manual Download Page 15

 

 

Closed Caption & Text on Video Overlay

15 

6.0 Serial Port Communication 

The CC-101(-PRO) operates at 9600 baud (8 bits, no parity) and has 2 
modes. 

1. Query Mode (default on power up) 
2. Overlay/Command Mode 

...................................................................................................  

.   Query Mode 

In Query Mode, the CC-101(-PRO) will print out current states in 
response to properly formatted queries. All Query Mode commands and 
responses are in ASCII format. Commands and responses will be inside 
double quotes. The double quotes are not part of the command or 
response. Only what is inside the double quotes is the command or 
response. 

Query: Video Status (Is there an active video on the selected input?) 

Command: “?V” 
Response:  “A” = Active.  “I” = Inactive (no video) 

Query: Video Standard (What is the video standard of the video?) 

Command: “?S” 
Response: “N” = NTSC standard.  “P” = PAL or SECAM standard 

Query: Current Output CC-101-PRO (What is the PRO output?) 

Command: “?O”  
Response: “V” = VGA.  

   “C” = 480P (Component) 

Query: Current Input (What is the selected input?) 

Command: “?I” 
Response: “S” = S-Video.   “C” = Composite Video 

Query: Current CC selection (What is the current CC selection?) 

Command: “?C” 
Response: “1” = CC1.   “A” = CC Alternate.  “N” = CC Off 

Query: Current CC Alternate value (What CC version is Alternate?) 

Command: “?A” 
Response: “2” = CC2.   “3” = CC3. “4” = CC4 

Query: Current Firmware Version (What is the current firmware version?) 

Command: “?F” 
Response: “Firmware Ver 2.x” 

Query: Turn On/Off CC 

Command: “S” (or “s”) 
Response: “Enable CC stream” or “Disable CC stream” 

Query: Blank Video Output 

Command: “B” (or “b”) 
Response: Video Output Blanks (Closed Caption or Text still displayed) 

Query: Un-Blank Video Output 

Command: “U” (or “u”) 
Response: Video Output Un-Blanks 

Summary of Contents for CC-101

























Reviews:

No comments

Brands by name

Popular brands

Load more brands