SPS Installation and Maintenance Manual
7
•
Do not modify this equipment as this could create a safety hazard and void your
Hali-Brite
®
warranty.
•
Use only Hali-Brite
®
replacement parts.
•
Read and carefully follow the instructions given throughout this manual for
performing specific tasks and working with specific equipment.
•
Follow all applicable safety procedures required by your company, industry
standards, and government or other regulatory agencies.
•
Make sure all equipment is rated and approved for the environment in which
you are using it.
•
Follow all instructions for installing components and accessories.
•
Protect components from damage, wear, and harsh environment conditions.
•
Allow ample room for maintenance, wiring accessibility, and cover removal.
2.3 Electrical Practices
•
Do not attempt to make electrical connections with the power on.
•
Disconnect and lock out electrical power before touching any electrical
connections.
•
Install all electrical connections to local code.
•
Use only electrical wire of sufficient gauge and insulation to handle the rated
current demand. All wiring must meet local codes.
•
Route electrical wiring along a protected path. Make sure moving equipment will
not damage it.
•
Protect equipment with safety devices as specified by applicable safety
regulations.
•
If safety devices must be removed for installation, install them immediately after
the work is completed and check them for proper functioning.
•
Always use rated electrical tools when performing electrical work.
•
Always make sure electrical connections are tight.
•
Make sure electrical covers are in place after installation.