background image

Safety Instructions

 

 
THIS MACHINE PRODUCES A HIGH 
PRESSURE WATER JET, WHICH CAN 
BE DANGEROUS. FOLLOW ALL THE 
MAINTENANCE AND SAFETY 
INSTRUCTIONS DETAILED IN THIS 
MANUAL. FAILURE TO FOLLOW THESE 
INSTRUCTIONS COULD RESULT IN 
SERIOUS INJURY OR DEATH. 

 

THE PRESSURE WASHER HAS BEEN 
CHECKED PRIOR TO DESPATCH. IF 
YOU HAVE ANY QUESTIONS PLEASE 
CONTACT THE CUSTOMER CARELINE. 
 

In addition to the safety information 
given in this manual all other 
applicable general safety 
regulations need to be observed

.

 

 
Make sure that the connection to 
the electric system corresponds to 
the latest edition of regulations and 
safety standards.   
 
It is strongly recommended that the 
electrical power supply for this 
machine include

s

 either a residual 

current device to interrupt power 
supply if dispersion current to 
ground exceeds 30mA for 30mS, 
or a grounding circuit. 

 

Do not use the unit if the electric 
cable or plug is damaged. Consult 
a qualified electrician for repair.   
 
Never direct the water jet at the 
unit itself. 

 

Never touch the mains plug with 
wet hands; never work bare-foot. 
 
Do not operate the unit in 
potentially explosive locations. 

 

Before any cleaning or 
maintenance, the electro-pump 
must be disconnected from the 
power supply. 
 
Do not use in the rain. 

 
This unit is for domestic use only. 
 
The water jet can be dangerous if 
used incorrectly; never direct the 
water jet towards yourself or others, 
do not clean clothing or foot wear, 
never direct the water jet towards 
animals or electrical appliances.   
 
Never put hand or fingers over the 
spray tip while operating the unit.   
 
Never try to stop or deflect leaks with 
any body part. 
 
Do not let children or persons not 
familiar with these safety instructions 
use the unit. 
 
Before start-up make sure that the 
lance is not open as this could 
release a sudden jet of high pressure 
water which could turn the lance into 
a dangerous whip. 
 
We recommend the use of safety 
goggles and suitable ear protection. 

 

Vehicle tyres/tyre valves may only be 
cleaned from a minimum distance of 
30cm otherwise they could be 
damaged. The first indication of this is 
a discolo

u

ration of the tyre. Damaged 

vehicle tyres/tyre valves can be 
dangerous. 
 
Never draw in solvent-containing 
liquids, undiluted acids or solvents! 
This includes petrol, paint thinners 
and heating oil. The sprayed vapour 
is highly flammable, explosive and 
toxic, also acetone, undiluted acids 
and solvents as these corrode 
materials used on the unit. 

 

Use only the nozzle supplied with this 
machine. 
 
Do not drive vehicles over the high 
pressure hose or the electrical cables. 
Do not kink or allow contact with 
sharp object

s

. The hose is easily 

damaged. 

Customer Careline: 0845 601 7834

 

3

Summary of Contents for HP 2800












Reviews: