8
Step 3
: Place the vehicle lap belt under the arm rest. Note: Pull the vehicle
diagonal belt on the vehicle buckle side through the red belt guide and the
vehicle lap belt under the arm rest. Make sure adult belt has not become
twisted (fig. 3).
Step 4
: Press your knee on the child car seat and pull the diagonal belt
along the direction as the picture shows (fig. 4).Make sure that belt has
not loosened. Tighten the diagonal sh-oulder belt in the direction of the
automatic roll-up as possible.
The satisfactory position of the adult safety-belt buckle relative to the child
car seat is as the Fig 6. You can contact the child car seat manufacturer if in
doubt about this point.
To release your child seat following the above instructions in reverse order.
Ensure that each part of the belt is tightened as possible.
Make sure all the belts` position is right and they has not become twisted.
Also check that the cover is not impeding the movement or fit of the belt
webbing in any way.
When installing the child car seat (Group I), In no way should you use the
head belt guide (Group 2, 3) in the head rest.
Summary of Contents for 123
Page 14: ......
