External Water Pump Specifications
Electrical Requirements
Congratulations!
This pump is rated at 120 Volts 60Hz. Only use a power supply rating voltage at 120 volts
and 60Hz, which complies with that listed on label on the Aqua Pulse Inline Pool Pump
Series External Water Pump. The cord must be plugged into a GFCI outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
A hard-wired installation is not recommended and will result in the warranty being voided!
It is your responsibility to contact a qualified electrician and assure that the electrical in-
stallation is adequate and in conformance with all national and local codes and ordinances.
Make sure this pump is securely installed before any operation.
To prevent severe injury and/or death, always earth your pump by attaching a bonding
wire to a buried copper rod.
*The APP-IP4600 & APP-IP5500 models have a bonding wires included with the pumps