Orb-85 Electronic Dartboard 4
Dartboard Functions
(see diagram on page 19)
RESET button
- Cancels current score and returns to start of game.
POWER button -
Press to turn game on or off. Dartboard has an automatic suspend mode
to conserve power and battery life (when using batteries). The dartboard will make sound
effect and display “SLEEP” on the display after approximately 3 minutes of non-use.
However, the scores are stored in memory and can be restored by pressing any button.
SOUND button -
Press to change volume to high, low, or off.
PLAYER/PAGE/SCORE button
- This button is used at the start of each game to select the
number of players you want to play the game. In addition, this button allows players to see
other player scores not on active display. This dartboard keeps track of up to 4 player
scoring (8 players in team play). When playing with more than 2 players, some scores will
not be visible when not active. Press and hold this button to view all players’ scores as
needed.
DOUBLE/MISS button
- This button is used for two separate functions. The
DOUBLE
function is used to activate the Double In/Double Out option during set-up for the “01”
games. This function is only active when selecting 301, 401, etc. games.
The
MISS
function is active during play of any game. If you wish to register a dart that
misses the target area, Press the
MISS
button.
BOUNCE OUT button
- Decide before play if you want to count darts that do not remain in
board (“bounce-outs”) or not. If you wish not to count bounce-outs toward your score,
simply press the
BOUNCE OUT
button immediately after a bounce out occurs to deduct the
score that registers.
START/HOLD button
- This multi-function button is used to:
•
START
the game when all options have been selected.
•
CHANGE
to the next player when one player is finished with his round.
This will put dartboard in
HOLD
status between rounds to allow player to
remove darts from the target area.
GAME button -
Press to page through the on-screen game menu.
CYBERMATCH button -
Press to activate Cybermatch feature. Refer to instructions on
page 5.
Display Protective Film
This electronic dartboard
may
have a clear film over the entire display area to prevent
scratching during shipping. It is recommended that this film be removed before play to
enhance the display area visibility. To remove, simply lift edge and peel off, and discard.
