HALDER EH 22352, Translation Of The Original Operating Instructions, Page: 46 / 58

46
6 Commissioning
6.1 Safety measures before commissioning
WARNING
Risk of injury due to lack of space!
A risk of injuries such as scratches, piercing or broken bones exists from
work equipment and/or components being arranged too closely together!
–
The place of use of the threaded lifting pins must be selected in such a
way that the room to manoeuvre necessary for personnel in the work
area is not restricted or impeded.
–
Only allow qualified personnel to carry out commissioning.
–
Cordon off the danger area.
–
Keep unauthorised persons away.
–
Designate a person to be in charge.
Make yourself sufficiently familiar with
–
the operating elements of the threaded lifting pins,
–
the equipment of the threaded lifting pins,
–
the way the threaded lifting pins works,
–
the immediate vicinity of the threaded lifting pins,
–
the measures for emergencies.
Perform the following activities before initial commissioning or recommissioning:
–
Check and make sure that all components are installed and working.
–
Check the threaded lifting pins for visible damage; immediately rectify any defects
found or report them to the supervisory staff – the threaded lifting pins may only be
operated in perfect condition.
–
Check and make sure that only authorised persons are in the work area of the
threaded lifting pins and that no other persons are endangered by use of the threaded
lifting pins.
–
Remove all objects and other materials from the place of use that are not required for
the operation of the threaded lifting pins.
–
Keep a commissioning log.