Trigger Setup
·
Select Trigger setup menu
·
Set trigger 1 to Power by using the left right arrows
Note: To minimise power surges delays can be entered before the trigger becomes active
Setting up a CD player
·
Select the source to which the CD player is to be connected e.g. SRC 8.
·
Go to Menu / Source setup menu and enter the following settings
To get the volume bar on the front panel display it is essential that the Up-conv(ersion) option
be selected for Video type.
If you are using an analog audio input from the CD player do not assign an active digital input
from any source.
SOURCE SETUP
>
Source
8
Title CD
Digital input Coax 3
Preset No change
Analog monitor
Video type Up-conv
Scaler bypass Off
EXIT
MAIN MENU
Speaker setup
Audio setup
Source setup
Display setup
THX Audio setup
>
Trigger setup
EXIT
TRIGGER SETUP
>
Trigger 1 sense
Power
On
Polarity
Posit
Delay
No
Duration
Infin
Trigger 2 sense
Power
On
Polarity
Posit
Delay
No
Duration
Infin
EXIT
