
10
Installation
Ensure you have read the Important Safety
Information on page 3, before installing your
Halcro amplifier.
Do not connec to
mains power un il all the
connections are made
and checked.
t
t
If you require assistance in the unpacking and
installation of your Halcro amplifier, please
contact your dealer.
NOTE: When l ting the unit,
always use two people.
if
The unit must be lifted by placing
your hands under the middle of
the bottom compartment. Do
not lift the unit under the top
compartment.
Unpacking
o
Unscrew the four knurled knobs at the
base of the container, and then remove
the upper part of the container by lifting
directly upwards until it clears the top of
the amplifier.
o
With an assistant, remove the plastic
wrapping and foam pieces, then lift the
amplifier from the base of the container.
o
Remove the plastic covering from the
unit.
o
Wearing the white cotton gloves
provided (to prevent marking the
amplifier while moving it into place) move
the unit to its final location (see
Positioning).
Storing packaging
The packaging is custom designed to prevent
damage from occurring during transport.
Store the packaging in a dry location.
Positioning
We suggest that the Halcro amplifiers be
positioned as near to your loudspeakers as
practical. This will reduce the length of the
loudspeaker cable required. The sides of the
unit house the heat sinks that are used to
dissipate heat. The airflow to these should not
be interrupted. Ensure there is at least
12
inches (300
mm) clearance around the
unit.